Tip: The bottom holes of the Incra T-track are not countersunk, so we recommend that you use 3 mm panhead screws to fix the T-track in the slot of your worktop. The heads project 2 mm. You can stop the slide nut from catching on the screw heads by removing the spring from the slide nut with a pair of flat pliers. Find a Large Selection of T-Tracks at Rockler Woodworking and Hardware.
8 Slot T Track Schedule
T-slot Sliders
Simple sliding mechanisms that sit inside the aluminium profile groove. T-slot Sliders 5, 6 and 8 are able to rotate as well as slide along the groove, catering to lightweight applications where you need to allow for alignment errors.
The T-slot Slider 8 80×40 is a strong option with low wear and low friction, creating a gentle transfer from one place to another. It can operate in difficult conditions with dust and humidity.
T-slot Slider 5 0.0.437.98 |
T-slot Slider 6 0.0.459.07 |
T-slot Slider 8 0.0.601.23 |
T-slot Slider 8 80×40 0.0.607.39 |
T-slot Slider 8 80×40 with Slide Clamp 0.0.626.68 |
T-slot Rollers
Effective rollers for lightweight applications such as keyboard drawers.
T-slot Roller 8 F 0.0.457.51 |
T-slot Roller 8 L 0.0.457.60 |
Slide Guide Strip
Mounted directly in the profile groove to create simple slide mechanisms. Alternatively, it can be screw-connected to aluminium profiles or to moving components.
8 Slot T Track Lost Phone
The design is slightly offset to prevent the moving components from colliding with the fixed frame.
Slide Guide Strip 5/5e, black 0.0.464.24 Max. L = 2000mm |
Slide Guide Strip 6/6e, black 0.0.459.27 Max. L = 2000mm |
Slide Guide Strip 8/8e, black 0.0.458.58 Max. L = 2000mm |